Anti Seize Xtreme Pressure Anti-Seize Lubricant (L90)
The best grease in the world? - we think it is. Nulon Anti Seize Xtreme Pressure Anti-Seize Lubricant (L90) is a complex bentone-based grease containing a high percentage of polytetrafluoroethylene (PTFE). L90 offers extremely high film strength and adhesion to protect moving parts against friction, wear and seizure in all types of extreme conditions.
Nulon Anti Seize Xtreme Pressure Anti-Seize Lubricant (L90) is a complex bentone based lubricating paste containing a high percentage of polytetrafluoroethylene (PTFE). Nulon L90 provides extremely high film strength and adhesion, protecting against initial start-up damage of machinery even after long periods of lay-up. Nulon L90 provides long-term lubrication of components that are otherwise difficult or impossible to lubricate after initial assembly. Most chemicals, solvents and corrosive agents do not affect Nulon L90. L90 does not dry or harden with age and offers performance over a wide temperature range. L90 protects exposed components against rust during lay-up. L90 permits more even torque pressures and faster breakouts of threads, joints, flanges and gaskets.
Pack sizes
- Minimises initial start-up damage
- Seals gasket surfaces without adhering
- Seals threads up to 8mm diameter
- Reduces possibility of seizing
- Reduces wear and friction
- Protects against corrosion
- Resists water wash out
- Offers a high degree of residual lubrication
Applications for L90 are limited only by the user's imagination. The following are only indicative of the potential applications for L90.
Engine Assembly
- Camshafts and followers
- All bearing surfaces
- Shoulders of head studs
- Threads (particularly those to be torqued)
- Valve stems and seals
- Oil seals
- Gasket surfaces
General Automotive
- Propeller shaft spline
- Ignition points rubbing blocks
- Anti-squeal for brake pads
- Assembly of differentials
- Hinge pins
- Door locks
- Assembly of gearboxes
- Prime mover turntables
Marine
- Cables
- Winches
- Pump assemblies
- Steering stems and cables
- Propeller shafts
- Seals
Agriculture
- Exposed chains and gears
- Splines
- Slides
- Seals
- Pumps
- Assembly of all agricultural machinery
Industry
- Slides and guides
- Cables and pulleys
- Railway points
- Bushes and pins
- Hinges of all types
- Camshaft lobes
- Threads
- Splines
- Sewing machines
- Machine assembly
- Assembly lubricant, particularly where subsequent lubrication is difficult
Typical Properties
| Tests | ASTM | Nulon L90 |
| Colour | Cream | |
| Flash point, COC, °C | D92 | 194 |
| Foam characteristics | D892 | Nil |
| Viscosity @ 40°C, cSt | D445 | 452 |
| Viscosity @ 100°C, cSt | D445 | 000 |
| Viscosity index | D2270 | 1A |
| Density K/l | D1298 | 0.9476 |
| Pour point °C | D97 | -18 |
| Melt point of PTFE °C | D1457 | >325 |