Green Premium Long Life Coolant Premix (SCLLTU)
Nulon Premium Long Life Pre-Mix Coolant provides the ultimate anti-freeze, anti-boil and corrosion protection for all vehicle cooling systems. The advanced Hybrid Additive Technology (H.A.T.) TYPE A formulation features 33% Ethylene Glycol and corrosion inhibitors with demineralised water. Designed to last 6 years or 500,000 km when used as a complete refill, it is safe to use in all passenger cars, 4WD, LPG, light and heavy-duty diesel engines.
Pack sizes
DIRECTIONS FOR COMPLETE REFILL: Refer to the owner’s manual for cooling system capacity. We recommend using a NULON Radiator/Cooling System Flush to ensure removal of harmful rust and mineral scale residue before using this product. Ensure the engine is switched off, turn the heater on and drain the old coolant (when cool) by removing the drain plug or bottom radiator hose. Flush the system until all remnants of the old coolant have been flushed from the system. Replace drain plug or bottom radiator hose. Add the required amount of NULON PREMIUM LONG LIFE PRE-MIX COOLANT to the radiator. Check the coolant level is correct when the system is cool, and top-up if necessary.
AS A TOP-UP TO EXISTING COOLANT: Add as top-up to existing coolant, then start the engine and turn the heater on. When the engine is warm, turn it off and allow it to cool. Check the coolant level, and top it up if necessary. Note: The life of Nulon Premium Long Life Pre-Mix Coolant defaults to that of the original coolant in the cooling system. If you are unaware of the type or life of the coolant in the system we recommend a complete coolant change within the next 5,000 km or 6 months to the appropriate Nulon Premium Long Life Concentrated Coolant.
- BMW (UK)
- CATERPILLAR 1 EO 535
- CUMMINS 92 T8-9
- DETROIT DIESEL ALLISON 7SE 298
- FORD ESE-M97B44-A
- FORD ESE-FM 97B18-C
- FORD WSS-M97B51-A1
- GM 1825M
- GM 1899M
- GME L 1301
- GM 6043
- GMH HN2043
- HOLDEN HN2217
- MAZDA MES MN 1210
- MERCEDES BENZ DBL 7700
- MWN DIESEL D234 2/15
- NISSAN NES 5509 LLC
- SAAB FSD 8704
- TOYOTA TSK 2601G
- VOLVO (UK)
- VW/AUDI/SKODA TL 774B/C (G11)
Exceeds the following International and National Standards:
- ASTM D3306
- ASTM D4985
- ASTM D5345
- AS 2108.1:2004 TYPE A
- BS6580:1992
- SAE J1034
- JIS K 2234
SAFETY: If poisoning occurs contact a doctor or the Poisons Information Centre in Australia 131 126 or New Zealand 0800 764 766. If swallowed, do NOT induce vomiting. If in eyes, hold eyelids apart and flush the eye continuously with running water. If skin contact occurs, flush with running water.Harmful if swallowed. DO NOT SWALLOW. Keep out of reach of children. Not to be used as a food container. If spilt on paintwork, wash off immediately with water. To protect the environment, dispose of used coolant in a safe manner or as advised by the Environmental Protection Authority.
FIRST AID: If poisoning occurs contact a doctor or the Poisons Information Centre in Australia 131 126 or New Zealand 0800 764 766. If swallowed, do NOT induce vomiting. If in eyes, hold eyelids apart and flush the eye continuously with running water. If skin contact occurs, flush with running water.
Test Methods
ASTM D1384 Glassware Corrosion Test |
ASTM D2570 Simulated Service Corrosion Test |
ASTM 2809 Cavitation Erosion Test |
ASTM D4340 Heat Rejection Corrosion Test |