Premium Mineral Automatic Transmission Fluid (NDEX3)

Nulon Premium Mineral Automatic Transmission Fluid (NDEX3) is a mineral based Automatic Transmission Fluid (ATF) for use in many transmissions specifying General Motors Dexron® III and Ford Mercon® fluids. Nulon Premium Mineral Automatic Transmission Fluid provides excellent wear protection, smoother shifting and is suitable as a top up with other Dexron® and Mercon® fluids.

Pack sizes

4L
NDEX3-4 NDEX3-4

Nulon Premium Mineral Automatic Transmission Fluid (NDEX3) is a mineral based Automatic Transmission Fluid (ATF) for use in many transmissions specifying General Motors Dexron® III and Ford Mercon® fluids. Nulon Premium Mineral Automatic Transmission Fluid provides excellent wear protection, smoother shifting and is suitable as a top up with other Dexron® and Mercon® fluids.

Benefits

  • Excellent low temperature protection
  • Compatible with wide range of seal materials
  • Smooth transmission shift feel performance
  • Excellent heat dissipation and foam suppression characteristics
  • Can be used as top up with other Dexron® III and Mercon® fluids

Suitable for pre-2006 GM transmission that requires GM dexron® III and in many other transmissions that specify Dexron® or Mercon® transmission fluid requirements (except Ford Type F). For higher level performance and heavy duty protection, upgrade to Nulon Semi Synthetic Multi-Vehicle Automatic Transmission Fluid (NATF), or Nulon Full Synthetic Multi-Vehicle Automatic Transmission Fluid (SYNATF).

  • Automatic transmission that requires Dexron® III, Ford Mercon® and Allison C-4  performance
  • Mitsubishi, Kia, and Hyundai automatic transmission SP-II/III
  • Mazda transmission that requires Mazda III Fluid
  • Toyota vehicles using  4 speed transmission (prior 2003)
  • Suitable as a top up for automatic transmission and power steering system requiring Dexron® or Mercon®  fluid
Typical Characteristics NDEX3
KV @ 100°C, mm2/s, ASTM D445 7.520
KV @ 40°C,  mm2/s. ASTM D445 40.28
Viscosity Index, ASTDM D2270 156
Brookfield Viscosity @-40°C, mPa.s, ASTM D2983 13000
Flash point, °C, ASTM D92 208
Density @ 15°C, g/mL, ASTM D4052 0.8540
Pour Point, °C, ASTM D97 -48

Due to continued product research and development the information contained in this Product Bulletin is subject to change without notification.

Avoid prolonged skin contact with used oils. Wear suitable gloves. If skin contact occurs wash immediately with soap and water. Protect the environment. Do not pollute drains, ground or water with used oils. Dispose of container as per local EPA guidelines. Do not use this container for fuel or solvents.

Industry Specifications

Industry group Specifications
Allison C-4
Caterpillar TO-2
Ford MERCON®
Ford M2C138-CJ
Ford M2C166-H
GM DEXRON® II D/E
GM DEXRON® III F/G/H
GM HN 2126
GM DEXRON®
Mazda M-III
Mercedes Benz 236.1
Mercedes Benz 236.5
Mercedes Benz 236.6
Mercedes Benz 236.7

Product reviews

Loading comment... The comment will be refreshed after 00:00.

Be the first to comment.

Add a review
Write comments...
You are a guest
or post as a guest