Engine Oil Flush (EOF)
Oil stays in engines longer and works harder than ever before, which creates damaging sludge. Don’t put clean oil into a dirty engine. Use Nulon Engine Oil Flush to remove damaging sludge deposits and extend the life of your engine. Recommended and safe for use in all engine types: petrol, diesel, LPG, old or new.
Pack sizes
- Extends engine life
- Helps free up sticky valve lifters
- Keeps oil strainer & pick-up clean
- Cleans & removes sludge, dirt & varnish
- Provides a cleaner environment for new oil
- Keeps new oil cleaner for longer
Add 1 bottle for up to 6 litres of engine oil before oil change. Start engine and let idle for 10-15 minutes. Stop engine and completely drain whilst old oil is still warm. Change oil filter and refill with a quality engine oil.
NOTE: To keep your engine clean, use Engine Oil Flush prior to each oil change. Nulon
Engine Oil Flush is safe to use with all engine parts and seals.
SAFETY DIRECTIONS: Avoid contact with eyes or skin. DO NOT SWALLOW. Keep out of reach of children. Combustible. Keep away from heat or flame. Do not breathe vapour. Wash hands thoroughly after use. Not to be used as a food container.
FIRST AID: For advice, contact a Poisons Information Centre (Phone e.g. Australia 131 126; New Zealand 0800 764 766) or a doctor (at once). If swallowed, do NOT induce vomiting. If in eyes, hold eyelids apart and wash the eye continuously with running water. If skin contact occurs, flush with running water.